You can now get RedHat RH-202 exam certification our ITCertKing have the full version of RedHat RH-202 exam. You do not need to look around for the latest RedHat RH-202 training materials, because you have to find the best RedHat RH-202 training materials. Rest assured that our questions and answers, you will be completely ready for the RedHat RH-202 certification exam.
We are doing our utmost to provide services with high speed and efficiency to save your valuable time for the majority of candidates. The RedHat RH-202 materials of ITCertKing offer a lot of information for your exam guide, including the questions and answers. ITCertKing is best website that providing RedHat RH-202 exam training materials with high quality on the Internet. With the learning information and guidance of ITCertKing, you can through RedHat RH-202 exam the first time.
ITCertKing is website that can help a lot of IT people realize their dreams. If you have a IT dream， then quickly click the click of ITCertKing. It has the best training materials, which is ITCertKing;s RedHat RH-202 exam training materials. This training materials is what IT people are very wanted. Because it will make you pass the exam easily, since then rise higher and higher on your career path.
In life we mustn't always ask others to give me something, but should think what I can do for others. At work if you can create a lot of value for the boss, the boss of course care about your job, including your salary. The same reason, if we are always a ordinary IT staff, yhen you will be eliminated sooner or later . We should pass the IT exams, and go to the top step by step. ITCertKing's RedHat RH-202 exam materials can help you to find shortcut to success. There are a lot of IT people who have started to act. Success is in the ITCertKing RedHat RH-202 exam training materials. Of course you can not miss it.
In such society where all people take the time so precious, choosing ITCertKing to help you pass the RedHat certification RH-202 exam is cost-effective. If you choose ITCertKing, we promise that we will try our best to help you pass the exam and also provide you with one year free update service. If you fail the exam, we will give you a full refund.
The appropriate selection of training is a guarantee of success. However, the choice is very important, ITCertKing popularity is well known, there is no reason not to choose it. Of course, Give you the the perfect training materials, if you do not fit this information that is still not effective. So before using ITCertKing training materials, you can download some free questions and answers as a trial, so that you can do the most authentic exam preparation. This is why thousands of candidates depends ITCertKing one of the important reason. We provide the best and most affordable, most complete exam training materials to help them pass the exam.
Exam Code: RH-202
Exam Name: RedHat (Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs))
One year free update, No help, Full refund!
Total Q&A: 171 Questions and Answers
Last Update: 2013-12-16
Now it is a society of abundant capable people, and there are still a lot of industry is lack of talent, such as the IT industry is quite lack of technical talents. RedHat certification RH-202 exam is one of testing IT technology certification exams. ITCertKing is a website which provide you a training about RedHat certification RH-202 exam related technical knowledge.
RH-202 Free Demo Download: http://www.itcertking.com/RH-202_exam.html
NO.1 mkswap /dev/hda? To create Swap File system on partition.
RedHat certification RH-202 RH-202 RH-202
NO.2 Quota is implemented on /data but not working properly. Find out the Problem and implement the quota
to user1 to have a soft limit 60 inodes (files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems.
Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem.
Once the affected partition is full, other users are effectively denied upload access to the disk. This is also
a reason to mount different filesystem directories on different partitions. For example, if you only had
partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all
of the space in your root directory (/). Without at least a little free space in the root directory (/), your
system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobytesized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system.
Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab /dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data
RedHat certification RH-202 RH-202 RH-202
NO.3 swapon /dev/hda? To enable the Swap space from partition.
RedHat certification RH-202 RH-202 RH-202
NO.4 Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main
task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root
password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's
password. To change the root password you need to boot the system into single user mode. You can pass
the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But
you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's
giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card,
resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already
done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a
router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
RedHat certification RH-202 RH-202 RH-202
NO.5 Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
RedHat certification RH-202 RH-202 RH-202
NO.6 vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
RedHat certification RH-202 RH-202 RH-202
NO.7 quotacheck -ufm /data
RedHat certification RH-202 RH-202 RH-202
NO.8 Make Successfully Resolve to server1.example.com where DNS Server is 192.168.0.254.
Answer: 1. vi /etc/resolv.conf
RedHat certification RH-202 RH-202 RH-202
NO.9 edquota -u user1 /data and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
3. One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing
any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially, physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equalsized chunks known as Physical Extents
(PE). As there are several other concepts associated with the LVM system, let's start with some basic
definitions:
Physical Volume (PV) is the standard partition that you add to the LVM mix. Normally, a physical volume
is a standard primary or logical partition. It can also be a RAID array.
Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs.
Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home and /var
on an LV.
Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the
commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. ext2online -d /dev/vg0/lv1 to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
4. Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
RedHat certification RH-202 RH-202 RH-202
NO.10 Reboot the System and verify that swap is automatically enabled or not.
10. You are a System administrator. Using Log files very easy to monitor the system. Now there are 50
servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs from all servers
into on LOG Server. How will you configure the LOG Server to accept logs from remote host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log
from other host configure:
1. vi /etc/sysconfig/syslog SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
2. service syslog restart
RedHat certification RH-202 RH-202 RH-202
NO.11 Press w to write on partitions table.
RedHat certification RH-202 RH-202 RH-202
NO.12 touch /data/aquota.user
RedHat certification RH-202 RH-202 RH-202
NO.13 Either Reboot or use partprobe command.
RedHat certification RH-202 RH-202 RH-202
NO.14 vi /etc/fstab /dev/hda? swap swap defaults 0 0
RedHat certification RH-202 RH-202 RH-202
NO.15 free -m Verify Either Swap is enabled or not.
RedHat certification RH-202 RH-202 RH-202
NO.16 quotaon -u /data
RedHat certification RH-202 RH-202 RH-202
ITCertKing offer the latest MB6-871 exam material and high-quality C-TFIN52-64 pdf questions & answers. Our HP2-N42 VCE testing engine and ST0-202 study guide can help you pass the real exam. High-quality 000-455 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/RH-202_exam.html
没有评论:
发表评论